Manufacturers

News

Lineup Expansion of Brushed DC Motor Driver ICs for Automotive Applications

2022-11-30 | Return

Toshiba Electronic Devices & Storage Corporation ("Toshiba") has expanded the lineup by launching two brushed DC motor driver ICs for automotive applications, “TB9053FTG” and “TB9054FTG,” each of which has incorporated two output driver channels rated at 5 A[1].

The new products TB9053FTG and TB9054FTG have incorporated two output driver channels rated at 5 A[1] and two types of small QFN package (6.0 mm × 6.0 mm (typ.)) are offered. This reduces the mounting area, helping to reduce the size of systems. In addition, by connecting the two channels in parallel, the products can drive one channel rated at 10 A[1]. Furthermore, PWM control with its low H-bridge output ON-resistance of 200 mΩ[2] allows highly efficient motor drive. In addition, their daisy-chain connecting function for SPI communication and motor controlling function by using only SPI communication reduce MCU ports.

Notes:
[1] The motor current that can drive motors actually is limited by operating conditions such as ambient temperature and power supply voltage.
[2] @Tj=25 °C, Iout=3 A, VBAT=8 V

Applications

Automotive equipment
● Power train systems: Electronic throttle control using H-bridge in engine control, various valve control, etc.
● Chassis systems: Latch driving and housing for retractable door mirrors, door latches, etc.
● Others: Control circuits that use H-bridge/half-bridge circuits, etc.

Features

● Output driver: 2-channel drive, 1-channel drive rated at 10 A[1] using 2 channels connected in parallel, and 4-channel half-bridge drive
● Low H-bridge output ON-resistance: Ron (H + L) = 200 mΩ (typ.) @Tj=25 °C, Iout = 3 A, VBAT = 8 V
● SPI communication function: Daisy-chain connecting function and motor controlling function by using only SPI communication reduce the number of MCU ports and the size of system

Main Specifications

Part number

TB9053FTG

TB9054FTG

Number of H-bridge channels

2ch (1ch H-Bridge, 4ch Half-Bridge available)

Supported motors

Brushed DC motor driver for automotive application

Motor functions

Forward / reverse / brake

Other functions

PWM control (Direct / SPI communication),
Slew rate setting

Current limit control, High-side current monitoring

DIAG output, Sleep Mode

Error detections

Over-current detection, over-temperature detection,
VBAT / VCC under-voltage detection

Open-load detection, Initial diagnosis

Operating ranges

Power supply voltage 1 VBAT (V)

4.5 to 28.0

Power supply voltage 2 VCC (V)

4.5 to 5.5

Power supply voltage 3 VDDIO (V)

3.0 to 5.5

External power supply

3 power supplies（VBAT, VCC, VDDIO）

Operating temperature
Topr (°C)

-40 to 150

Packages

Code and package characteristics

P-LQFN40-0606-0.50-001
(A power QFN package)

P-VQFN40-0606-0.50-004
(A wettable flank VQFN package)

Size (mm)

6.0 × 6.0 (typ.),
t=1.7 (max)

6.0 × 6.0 (typ.),
t=1.0 (max)

Reliability

AEC-Q100 / 006 capable

Block Diagram

Note:
Some of the functional blocks, circuits, or constants in the block diagram may be omitted or simplified for explanatory purposes.

Application Circuit Examples

Note:
The application circuits shown in this document are provided for reference purposes only.
Thorough evaluation is required, especially at the mass production design stage.
Providing these application circuit examples does not grant any license for industrial property rights.

Source: https://www.global.toshiba

Part number		TB9053FTG	TB9054FTG
Number of H-bridge channels		2ch (1ch H-Bridge, 4ch Half-Bridge available)
Supported motors		Brushed DC motor driver for automotive application
Motor functions		Forward / reverse / brake
Other functions		PWM control (Direct / SPI communication), Slew rate setting

		Current limit control, High-side current monitoring
		DIAG output, Sleep Mode
Error detections		Over-current detection, over-temperature detection, VBAT / VCC under-voltage detection

		Open-load detection, Initial diagnosis
Operating ranges	Power supply voltage 1 VBAT (V)	4.5 to 28.0
	Power supply voltage 2 VCC (V)	4.5 to 5.5
	Power supply voltage 3 VDDIO (V)	3.0 to 5.5
	External power supply	3 power supplies（VBAT, VCC, VDDIO）
	Operating temperature Topr (°C)	-40 to 150

Packages	Code and package characteristics	P-LQFN40-0606-0.50-001 (A power QFN package)	P-VQFN40-0606-0.50-004 (A wettable flank VQFN package)

	Size (mm)	6.0 × 6.0 (typ.), t=1.7 (max)	6.0 × 6.0 (typ.), t=1.0 (max)

Reliability		AEC-Q100 / 006 capable