Manufacturers

뉴스

TDK introduces flexible Multi-Hall-array sensor for high-precision current sensing

2021-04-22 | 반환

> Non-intrusive, galvanic isolated contactless current measurement
> Configurable for highly accurate linear current sensing with read-out of multi-Hall-array or for differential coreless and stray-field robust current sensing
> ISO 26262 ASIL-B ready and AEC-Q100 qualified

TDK Corporation expands its Micronas Hall-effect sensor portfolio with the CUR 4000 sensor. The sensor, developed for highly accurate current measurements in automotive and industrial applications, offers non-intrusive, galvanic isolated contactless current sensing. These features will contribute to the future of high-voltage systems of hybrid and electric vehicles (xEV). The product is suited for DC and AC measurements and overcurrent detection in high-power battery monitoring applications and can measure dynamic current ranges up to ≥2000 A.* For these kind of measurement tasks, CUR 4000 comes with different configurable modes for linear core-based and differential coreless application setups.

The sensor's production is planned for the second quarter of 2021, with samples already available.

In the linear modes of CUR 4000, a configurable array of Hall elements enables highly accurate measurements for core-based stray-field robust sensor-module designs. The differential mode enables minimal coreless and stray-field robust system designs without shields. Read-out of the complete Hall array provides an output-offset temperature-drift below ±0.05 percent full scale. Furthermore, the sensor delivers a hysteresis-free output signal. A non-linearity error of ±0.2 percent and a noise performance of ±0.005 percent full scale allows precise current measurements with a signal bandwidth of up to 8 kHz.

TDK used proven Hall sensor technology to structure the CUR 4000. Primary characteristics, like temperature dependent gain and offset can be adjusted to the magnetic circuitry by programming the non-volatile memory. CUR 4000 is defined as SEooC ASIL-B ready, according to ISO 26262 with several on-board diagnostic functions, which builds a basis for current sensor modules with a higher ASIL level using redundancy techniques or a combination with other current sensing technologies.

CUR 4000 is available in a small eight-pin SOIC8 SMD package for less complex assembly compared to through-hole packages.

Glossary

> xEV = Vehicles including an electric traction motor
> SEooC = Safety Element out of Context
> SPI = Serial Peripheral Interface
> SOIC = Small Outline Integrated Circuit

Main applications*

> xEV battery monitoring, battery disconnect unit and overcurrent detection
> Stationary battery management

Main features and benefits**

> Multi-Hall-array sensor technology for high-precision core-based current sensing
> Configurable for highly accurate linear current sensing with read-out of multi-Hall-array or for differential coreless and stray-field robust current sensing
> Contactless current sensing (non-intrusive)
> SEooC ASIL-B ready according to ISO 26262 to support Functional Safety applications
> Digital (SPI) interface for direct microcontroller connectivity and sensor programming
> Sleep modes (wake-up pin) for low power consumption
> Automotive temperature grade (TA = -40 °C up to 150 °C)

Key data

Type	CUR 4000
Package	SOIC8
Output formats	SPI
Accuracy	Measurement error below ±1%
Flux density amplitude range	±100 mT
Functional Safety	ASIL-B ready
Temperature Range	T_A = –40 °C to 150 °C
Sample availability	Now available

* Any mention of target applications for our products are made without a claim for fit for purpose as this has to be checked at system level.
**All operating parameters must be validated for each customer application by customers’ technical experts.

Source：http://www.global.tdk.com/