Manufacturers

News

Toshiba to Start Mass Production of ApP Lite™ Processor Family IC for Wearable Applications

2017-07-06 | Return

TOKYO - Toshiba Electronic Devices & Storage Corporation announced today that mass production has commenced for TZ1201XBG, the latest addition to its line-up of ApP LiteTM application processors for IoT devices, including wearables.

The compact TZ1201XBG graphics processor is based on a high-performance 32-bit ARM® Cortex®-M4F processor capable of operating at 96MHz (up to 120MHz with overdriving). Combining the ARM core with on-chip power management gives the TZ1201XBG a low power consumption of 70μA/MHz in active mode. With a 350mAh battery and an always-on display this enables around one month between charges in second watch applications - and two months for minute watches.

With 2.2MB of embedded high-speed SRAM, an advanced LCD controller and 2D graphics accelerators, the TZ1201XBG provides a powerful platform for alpha-blending, drawing, rotating, texturing and resizing images, and for on-the-fly color conversion. The fully-featured processor offers integrated support for either an HVGA (480x320) display at 30fps or a QVGA display (320x240) at up to 60fps.

The high-precision analogue front-end (AFE) combines a 24-bit delta-sigma ADC, 12-bit ADC, 12-bit DAC and an LED DAC thereby supporting direct sensing. These, in combination with software filtering, secure significant space and power savings.

120 free GPIOs and integrated USB, UART, SPI, and I2C interfaces support the use of external sensors and peripherals to monitor activity and movement, expanding the landscape of customer applications.

The integrated audio interfaces for voice command and voice trigger processing, and the 2D graphics accelerators, will allow Toshiba’s customers to deliver a higher level user experience.

Key Features

>Low power design

。Active current consumption of 70 μA/MHz

>High performance 2D graphics accelerator enabling smooth functioning of the graphical user interface (GUI).

>High-precision AFE

。 Up to 4-channel voltage/current/impedance multi-sensing

。3 configurable amplifier mode with little additional external components, instrumentation amplifier/trans impedance amplifier/programmable gain amplifier (PGA)

。Up to 22-bit effective number of bits (ENoB) dedicated about 10 µV

>Support various I/Os such as I2C, UART, SPI to use external sensors and peripheral devices to monitor the duration and level of physical activity to promote exercise and healthy lifestyles.

Applications

IoT devices, including wearables

Main Specifications

Part number	TZ1201XBG
CPU	ARM Cortex-M4F
Maximum Frequency	up to 120MHz
Embedded SRAM	2.2MB
e-MMC	2ch
External bus	1ch
Graphics accelerator	2D
LCD Controller	MIPI^® DBI Type B, Type C, DSI
Supported resolution	HVGA(480x320)@30fps QVGA(320x240)@60fps
GPIO	120 bits
I²C (Master/Slave)	2ch
UART	4ch
DMA	16ch
AES	128/192/256-bits key length
True random generator	1 unit
Compression & decompression	1 unit
SPI	4ch
Quad SPI for Flash memory	Supported
PWM	8ch
32-bit Timer	2ch
Watchdog Timer	1ch
Instrumentation amplifier-Gain	x1 to x4
PGA-Gain	x1 to x32
12-bit ADC	16ch
24-bit ADC	4ch
DAC	1
LED driver	4
USB	USB 2.0 Device 12 Mbps, 1 port 4 bidirectional endpoints
package dimensions (W x L x H, mm)	8.0 x 8.0 x 0.6

* ARM and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere.

* MIPI is a registered trademark of MIPI Alliance, Inc.

* All other company names, product names and service names may be trademarks of their respective companies.

Source：http://www.semicon.toshiba.co.jp/eng/